Specifications

4-24 Optical Amplifiers 4000326 Rev A
Monitor Status Parameters,
Continued
STATUS Screen Description
The STATUS menu on the ICIM allows you to verify the status of the amplifier.
Status Parameters
The following table describes each status parameter.
Parameter Meaning Description
Pout Power output Output power level
Pin Power input Input power level
ID SMC ID Module SMC ID number
IlasA Laser diode A current Laser diode A current in mA
IlasB Laser diode B current Laser diode B current in mA
IlimA Laser A current limit
Hardware current limit for laser A
in mA
IlimB Laser B current limit
Hardware current limit for laser B
in mA
ItecA TE cooler A current
Current for thermoelectric cooler A
in amperes
ItecB TE cooler B current
Current for thermoelectric cooler B
in amperes
PtmpA Laser diode A temperature
Laser diode A temperature in
degrees Celsius
PtmpB Laser diode B temperature
Laser diode B temperature in
degrees Celsius
Mtemp Module temperature
Module temperature in degrees
Celsius
HtmpA Pump A temperature fault Status of pump A temperature
HtmpB Pump B temperature fault Status of pump B temperature
PumpA Controller temperature fault Status of controller A temperature
PumpB Controller temperature fault Status of controller B temperature
PSint Internal power supply Status of the internal power supply
Continued on next page