Specifications

4000326 Rev A Transmitters 1-11
Monitor Status Parameters,
Continued
Monitoring Status Parameters
The following table describes each status parameter.
Parameter
6473-NC
Overlay
Transmitter
6473-10
750 MHz
Transmitter
6473-12
750 MHz
Transmitter
6473
870 MHz
Transmitter
6473-10
870 MHz
Transmitter
Summary
STATUS
Screen:
• Power
0.0 dBm to
+16.0 dBm
0.0 dBm to
+16.0 dBm
0.0 dBm to
+16.0 dBm
0.0 dBm to
+16.0 dBm
0.0 dBm to
+16.0 dBm
• Bias
current to
the laser
0 mA to
108 mA
0 mA to
108 mA
0 mA to
108 mA
0 mA to
108 mA
0 mA to
108 mA
• SMC ID
Programmable
0001 to 65535
Programmable
0001 to 65535
Programmable
0001 to 65535
Programmable
0001 to 65535
Programmable
0001 to 65535
Power
(Output power
of the laser)
0.0 dBm to
+16.0 dBm
0.0 dBm to
+16.0 dBm
0.0 dBm to
+16.0 dBm
0.0 dBm to
+16.0 dBm
0.0 dBm to
+16.0 dBm
Bias
(Bias current to
the laser)
0 mA to
108 mA
0 mA to
108 mA
0 mA to
108 mA
0 mA to
108 mA
0 mA to
108 mA
Ltemp
(Laser
temperature)
N/A
0.0°C to
255.0°C
0.0°C to
255.0°C
0.0°C to
255.0°C
0.0°C to
255.0°C
RFlvl
(Level of RF
input)
0 V to
+10.81 V
0 V to
+10.81 V
0 V to
+10.81 V
LOW, HIGH,
or OK
0 V to
+10.81 V
CW Mode
(Continuous
wave mode)
N/A On or Off On or Off On or Off On or Off
Rel RFdrv
(RF drive level
to the laser)
-1.5 dB to
+1.5 dB
-1.5 dB to
+1.5 dB
-1.5 dB to
+1.5 dB
-1.5 dB to
+1.5 dB
-1.5 dB to
+1.5 dB
Continued on next page