Specifications

4000326 Rev A Optical Switches 3-29
Monitor Status Parameters Using LCI,
Continued
Monitoring Status Parameters
To monitor the parameters, navigate to the Module Details window of the switch (in
the LCI module tree). The alarms are shown under the Parameters and Status
headings.
The following table describes each switch status parameter.
Parameter Units Meaning Typical Value
Port 3 Optical
Power
dBm
Input optical
power on Port 3
• 1310 nm: -13.0 dBm to 13.0 dBm
• 1550 nm: 13.0 dBm to 18.0 dBm
Port 4 Optical
Power
dBm
Input optical
power on Port 4
• 1310 nm: -13.0 dBm to 13.0 dBm
• 1550 nm: 13.0 dBm to 18.0 dBm
Switch Position Integer
Read switch
position
Bar/Cross
Module
Temperature
°C
Module
temperature
-40.0°C to +80.0°C