Specifications

4000326 Rev A Optical Switches 3-27
Modify Alarm Limits Using LCI
Introduction
Using LCI, you can modify the nominal input power for both ports.
Modifying Alarm Parameters
To modify the nominal input power parameters, navigate to the Module Details
window of the switch (in the LCI module tree). The parameters are shown under the
Parameters heading.
The following table shows parameters with alarm limits that can be modified.
Parameter Meaning Values
Port 3 Optical Power
Nominal input optical
power at input 3, in
dBm
Port 3 Optical Power
Nominal input optical
power at input 3, in
dBm
• 1310 nm: -13.0 dBm to 13.0
dBm, increments of 0.1 dBm
• 1550 nm: -13.0 dBm to 18.0
dBm, increments of 0.1 dBm