Specifications

2-66 Receivers 4000326 Rev A
Monitor Status Parameters Using LCI
Introduction
The LCI software allows you to verify the status of the receiver.
Status Information
The following receiver status information is available.
• Optical input power
• Module temperature
Monitoring Status Parameters
To monitor the parameters, navigate to the Module Details window of the receiver
(in the LCI module tree). The alarms are shown under the Parameters and Status
headings.
The following table describes each receiver status parameter.
Parameter Meaning Operating Range
Rx 1 Optical Input
Power
Displays optical input power
for Rx 1
-17.0 dBm to +2.0 dBm
Rx 2 Optical Input
Power
Displays optical input power
for Rx 2
-17.0 dBm to +2.0 dBm
Module Temperature Displays module temperature
-40.0°C and 65.0°C