Specifications

2-44 Receivers 4000326 Rev A
Monitor Alarm Parameters Using the ICIM
Introduction
The Intelligent Communications Interface Module (ICIM) in the Prisma II Chassis
allows you to scroll through and view alarms that may exist for the receiver.
Receiver Alarm LED Description
The Alarm LED located on the receiver’s front panel illuminates or blinks to indicate
the state of the receiver.
The following table shows each possible receiver state.
If the Alarm LED: This Indicates:
Blinks a minor alarm condition.
Illuminates a critical alarm condition.
Alarm Information
The following receiver alarm information is available:
• Optical power level
• Maximum optical input power
• Hybrid current
• Module temperature
• Receiver enabled/disabled
• Bus status
Alarm Limits
Alarms limits fall into one of the following categories.
• Minor low
• Major low
• Minor high
• Major high
Continued on next page