Specifications

2-30 Receivers 4000326 Rev A
Monitor Alarm Parameters
Introduction
From the ALARMS screen on the receiver, you can determine whether there is a
receiver alarm condition and, if there is an alarm condition, the cause of the alarm.
If an alarm condition:
• Is present, the cause of the condition displays on the screen. Items that are not in
the alarm state are passed over and are not displayed.
• Is not present, the message No Alarms displays on the screen.
Alarm Information
The following receiver alarm information is available:
• Software self test
• Received optical power
• Module temperature
• +5 V DC analog power level
• +5 V DC digital power level
• -5 V DC power level
• +15 V DC power level
• +24 V DC power level
• Power supply status (primary and secondary)
Continued on next page