Specifications

4000326 Rev A Receivers 2-11
Troubleshoot Alarm Conditions
Introduction
The information in this section provides possible solutions to the following types of
alarm conditions:
• Connections and loss of power
• Receiver
• Power supply
Troubleshooting Connections and Loss of Power
If the RX FAULT indicator is off, refer to the following table to restore power.
Alarm Condition Possible Causes Possible Solutions
The power supply
connection may be loose.
Verify that all power supply
connections are secure.
The receiver may not be
completely seated in
chassis.
Verify that the receiver is
securely connected to the
chassis.
No power is present.
Check the AC power at the
receptacle, if applicable.
RX FAULT
indicator is off.
The indicators may be
burned out.
Contact Scientific-Atlanta for
repair.
For instructions, refer to Chapter
6, Customer Information.
Continued on next page