Specifications

2-6 Receivers 4000326 Rev A
Monitor Status Parameters
Introduction
From the STATUS screen on the receiver, you can check various parameters to verify
the status of the receiver.
Status Information
The following receiver status information is available:
• Received optical power level
• Module SMC ID
• Received optical power status
• Received optical power level
• Hybrid current status
• Hybrid current
• RF attenuation
• Optical wavelength
• Nominal input power
• Threshold value
• Module temperature
• +5 V digital power level
• +5 V analog power level
• -5 V backplane power level
• +15 V control card power level
• +24 V backplane power level
• Backplane power supply status (primary and secondary)
Continued on next page