Specifications

2-4 Receivers 4000326 Rev A
Monitor Alarm Parameters,
Continued
ALARMS Screen Description
The ALARMS screens let you quickly determine the cause of an alarm. When an
ALARMS screen is active, press the Select
key on the receiver to rotate through
the active alarms.
Each screen also displays the current parameter. If no alarm is active for a particular
parameter, the module does not display that screen.
The following table shows the values displayed on the ALARMS screen for out-of-
range errors or a failure.
ALARMS Screen Value Description
OK
Component is operational or passes test (for
parameters without an operating range).
HIGH The measured level is above the operating range.
LOW The measured level is below the operating range.
FAIL
Component, test, or signal failure (for parameters
without an operating range).
Continued on next page