Specifications

1-114 Transmitters 4000326 Rev A
Modify Alarm Limits Using LCI
Introduction
Using LCI, you can modify limits for several alarm parameters for the transmitter.
Modifying Alarm Parameters
Modifiable alarm parameters are located under the Parameters heading of the
Transmitter Module Details window.
The following table shows parameters with alarm limits that can be modified.
Parameter Typical Range
Laser Bias 50 to 100 mA
Laser Temperature 20.0°C to 30.0°C
Module temperature -40.0°C to +65.0°C
RF input level Enabled
Modulator bias -5 V to +5V
SBS 2 GHz Power 10 to 400
SBS 6 GHz Power 10 to 400
RF Input 0 dB
Optical Output Power ±0.5 dBm of nominal
Output Power ±0.5 dBm of nominal
-5V Supply Voltage -5 V high or low
-12V Supply Voltage -12 V high or low
+12V Supply Voltage +12 V high or low