Specifications

4000326 Rev A Transmitters 1-107
Monitor Status Parameters Using the ICIM
Introduction
The STATUS menu on the ICIM allows you to verify the status of the transmitter.
Status Information
The following transmitter status information is available.
• Optical output power
• Measured laser current
• Relative RF input power
• Module temperature
• Constant power loop status
• Measured TEC current
• Laser temperature
• Laser on/off
• Continuous wave mode
• Low RF input alarm status
• Modulator bias
• SBS PLL #1 status
• SBS PLL #2 status
• 2 GHz SBS power level
• 6 GHz SBS power level
• Internal –5 V power level
• Internal +12 V power level
• Internal –12 V power level
• Constant current
• Automatic gain control
• Master/slave operation
• RF drive level
• Link distance or span
• Optical modulation index
Note: Not all alarm parameters listed above apply to all 1550 nm Transmitters.
Continued on next page