Specifications

1-96 Transmitters 4000326 Rev A
Monitor Status Parameters Using LCI,
Continued
Monitoring Status Parameters
To monitor the parameters, navigate to the Module Details window of the
transmitter (in the LCI module tree). The alarms are shown under the Parameters
and Status headings.
The following table describes each transmitter status parameter.
Parameter Units Meaning
Optical Output Power dBm Optical output power
Laser Bias Current mA Laser bias current
RF Input Power dB RF input level
Module Temperature °C Module temperature
TEC Current mA Laser thermoelectric cooler current
Laser Temperature °C Laser temperature
RF Drive Setting N/A RF drive level
Enable Laser N/A Laser on/off
CW Mode Control N/A Continuous wave mode operation
Low RF Alarm Inhibit N/A Low RF alarm enabled/disabled
Master N/A Master or Slave operation