Installation Guide

4030542 Rev B 53
Configuration File Save/Restore Function
3 Type the IP address of the TFTP server and the name of the file to be retrieved,
and then press
Enter. A "ready" prompt appears.
4 Press
Enter (or ) to initiate the file transfer process (or press Return Q to cancel).
After the transfer process is complete, you are again prompted to press
Enter (or
) to load the configuration file. Return
5 Press
Enter (or ) to load the configuration file (or press Return Q to cancel).
Once loaded into the module’s SNMP memory area, you are prompted to reboot
the module to make the new configuration active.
Note: By default, the new configuration file does not overwrite the current module
IP address configuration.