Installation Guide

4030542 Rev B 51
Configuration File Save/Restore Function
To Upload a Saved Configuration File Using iConfig
Complete the following steps to upload a saved configuration file using iConfig.
1 Log into the module through iConfig.
2 Select the
tab. Administration
3 From the iConfig Administration tab, click
. Upload Configuration
4 The Select Config File dialog window appears, prompting you to select a
configuration file.
5 Select the appropriate configuration file, and then click
OK. The file upload
process begins.
Note: Once selected, you can view any notes that were added when the file was
saved.
When the file upload process completes, you are notified of the status and
reminded that a reboot is necessary for the new configuration to become active.