Installation Guide

4030542 Rev B 47
Using PrismaVie
w
Using PrismaView
PrismaView software provides network management in an easy-to-use GUI format.
After installing PrismaView on a network management PC using a Windows
operating system, you can access PrismaView using the Windows Start menu.
Windows SNMP services must be installed to receive traps. Note:
The left side of the PrismaView screen displays the Prisma FiberLinX products on
the network. To open the PrismaView screen for this module, click the connection
for
Mini FiberLinX-II.
The example above shows a connection to a FiberLinX, but this varies by
configuration. When configuring the Mini FiberLinX-II as a standalone unit, only the
Mini FiberLinX-II will appear.
A navigation bar on the top of the screen displays the options for configuring the
Mini FiberLinX-II connection.
These options have the functions described below.
Option Description
Host Displays the configuration screen for the Host connection.
Remote Displays the configuration screen for the Remote connection. This will
show the Mini FiberLinX-II configuration information. Information on
this screen is provided on the following page.
Note: The Host and Remote buttons will not appear when configuring
the Mini FiberLinX-II alone. In this setup, a Configuration button will
appear with the same settings.