Installation Guide

4030542 Rev B 43
Using the Main Configuration Screen
The following table shows how the settings are entered.
Setting VLAN Priority Tags
Optical - - Yes
Data Tag2 4 No
Mgmt (SNMP) Tag1 1 Yes
System Description (Sysdescr)
Sysdescr offers the options of assigning a system name, System Contact System
Location, Unit Description, and individual Port names.
To assign each of these values, type the description or name, up to 32 characters per
line, in the field provided. Press
Enter key after each entry to complete the editing
task.
To change the MIB name of the Mini FiberLinX-II as it appears on the network, type
and then press sysname Enter. Enter a new name, not exceeding 16 characters in
length.
Unit Control Settings
Serial/Telnet sessions display unit status as well as allowing configuration of some
of the Mini FiberLinX-II features.
To access the Unit screen, type
unit and then press Enter.
From this screen, view the settings for FlowControl, FiberAlert, LoopBack,
Maximum Frame Size, and 802.1p Base Priority.