Installation Guide

38 4030542 Rev B
Using the Main Configuration Screen
ations, there are six modes of operation that can be
t session. All of the modes of operation will
Data port.
Operational Mode Configuration
As referenced in Product Applic
configured through the Serial/Telne
block management traffic on the
and then press
To access the configuration screen, type
config Enter from the
Additional Commands screen.
Mode One – Default and Default Plus
The default mode is designed to pass untagged traffic only. Press F4 to return to the
Additional Device-Specific Commands screen.
In Default Mode Plus, all tagged and untagged traffic passes between the data and
optics ports. Management to the device must be untagged.