Installation Guide

36 4030542 Rev B
Using the Main Configuration Screen
Viewing Port RMON Statistics
To view port RMON (Remote MONitoring) statistics on the Mini FiberLinX-II, type
rmstats and then press Enter.
A screen opens displaying RMON information on packets received as defined in
RFC 2819 for RMON.
If necessary, you can refresh the data on this screen by pressing the Note: Space Bar.
Version
To display the current firmware version for the Mini FiberLinX-II, , type
version and
then press
Enter.
Note: In the examples shown, ports are referred to as they appear on the module
itself. Some screens may show TX and FX for the port titles, where TX = DATA port
and FX = OPTICS port.
Reboot
To save the current settings and reboot the Mini FiberLinX-II, type
reboot and then
press
Enter.
Setting Security
Security settings on the Mini FiberLinX-II are reserved for non-standard
configurations. Use security configuration only when non-standard networking
equipment is being employed.