Installation Guide

30 4030542 Rev B

Using the Main Configuration Screen

Press Enter at the prompt to display the main configuration screen.

The following displays are available:

Saved Values (displays changes made during current session)

 IP Address (must be assigned during initial configuration)

 Subnet Mask (must be assigned during initial configuration)

 Default Gateway (default router for IP traffic outside subnet)

 Server IP Addr (for the TFTP server)

 New Prom File (firmware file name)

Current Values (displays values currently in use)

 IP Address (IP address of SNMP agent)

 Subnet Mask (mask to define IP subnet)

 Default Gateway (default router for IP traffic outside subnet)

 Server IP Addr (for the TFTP server)

 New Prom File (firmware file name)