System information

Interoperability
77
after the 15-minute session refresh
because the 1080p30/720p60 capable
endpoints will start transmitting this
resolution, which the 720p endpoint cannot
decode.
 Multisite is not supported when doing
CTMS conferences
Polycom RMX 7.8.0.246 Basic SIP/H323 call OK
Encrypted calls: no audio on C/EX/MX/SX
series (CSCuh50078), blocky video on SX20
(CSCuh32320) – both bugs are fixed in TC6.2.1
BFCP OK
RadVision
Scopia Elite
7.5, 8.0 BFCP does not work
Streaming servers
Equipment Software revision Comments
Cisco
TelePresence
System Content
Server
S4.1, S5.1, S5.2, S5.3
Endpoint Interoperability
Equipment Software version Protocol Comments
Cisco TelePresence
System
► 500series
► 3x00series
► 1x00series
► TX9000
► TX9200
► TX1310
1.9.3 (Ten Bears)
SIP
Encrypted calls supported with TC6
CSCtz95144: TX9000 version earlier
than 1.9.2 does not handle RTCP PLI on
the BFCP channel, which results in no
presentation.
CSCue55134: P2P call between MX200
and CTS EP. Video corruption can be
observed after 1 or 2 minitues into the
call. The artifacts can be zebra pattern,
color off, blockiness does not smooth
out. Corruption clears up with I-frame.
This may also cause high jitter value