System information

Interoperability
76
TelePresence
Server MSE
8710
CSCuh38547: See description above
TANDBERG
MPS
J4.5, J4.6
CSCuc81894: C series codec shows black
screen momentarily in a MPS voice switch
conference J4.6 when switching between 4:3
image and 16:9 image
TANDBERG
MCU
D3.10
Cisco MCU
53xx
4.4(3.42) Tested with TC5.1.4
Cisco MCU
42xx
4.4 (3.42)
Cisco MCU
45xx
4.4(3.42)
Cisco CTMS
Cisco
recommends
customers to
move to the
TelePresence
Server
platform due to
the number of
caveats
between the
TC endpoints
and CTMS and
the end of life
of CTMS.
1.9
 When dialing to the CTMS, VCS cannot be
interwork the call (H.323 to SIP
conversion). Such a conversion will make
the call drop.
 1.9: Using call rate below 1152kbps will
result in CIF video in a CTMS conference
 Endpoints that requires the HD option key
(SX20 and C20) and do not have it
installed will not be able to receive
presentation from CTS devices in a CTMS
conferences.
 CSCuj13986: TC endpoints (except EX60)
without Premium Resolution option key do
not display presentation sent from any
CTS endpoint in a CTMS conference.
 TC interoperability must be enabled on the
CTMS.
 Black Screen Codes are supported, but
these will not work if the system is behind
a firewall.
 CSCud36845: CTMS can not handle mid
call re-invite. This causes problems in
mixed 720p/1080p environments
 CSCud45692: CTMS does not respect
capability set from a 720p restricted C
series endpoint. This may cause no video