System information

Open and resolved caveats in TC6
64
Reference ID
Endpoint /
Device
Versions
affected
Fix
Target
Summary
improved.
CSCuf93352
SX20
6.0.x
6.2.0
When an SX20 is in standby mode and is reloaded
from the GUI, it comes up correctly, however, the
display connected to HDMI1 does not come out of
standby. The display on HDMI2 comes correctly out
of standby.
CSCue78225
Touch 8
6.0.x
6.2.0
When starting a presentation from the Touch 8”, the
presentation dialog goes to the secondary camera
instead of the PC. PC input has been set as the
default presentation source.
CSCug13558
All TC
endpoints
6.0.x
6.2.0
The remote service supports the use of anonymous
SSL ciphers.
CSCue62562
All TC
endpoints
6.0.x
6.2.x/7.x
When a login is required for the OSD
(xConfiguration Video OSD LoginRequired: on),
only a username and PIN are required to log into
the OSD. Thus, if no PIN is configured, non-admin
users can log into the OSD as admin, giving them
access to admin-level system configuration. No
password is required.
CSCug13548
All TC
endpoints
6.0.x
6.1.x
6.2.0
The remote service supports the use of medium
strength SSL ciphers
CSCue94398
Touch 8
6.0.x
6.1.x
6.2.0
When setting PresentationSelection hidden, the
input is still available in Touch UI.
CSCug06492
All TC
endpoints
5.x
6.x
6.2.x
A switch is configured with a default data VLAN on a
switch port. It tags all packets, also EAP packets
with the DATA VLAN. When xConfiguration Network
1 VLAN Voice Mode is set to Off we can read this
packet even though it is tagged with VLAN. When
we set VLAN mode to auto or manual we discard
any packet that is not tagged with our VLAN.
CSCug06474
All TC
endpoints
5.x
6.x
6.2.x
When using 802.1x and VLAN and the same time,
we tag the EAP packets with a VLAN tag. The
switch does not accept packets tagged with VLAN,
hence 802.1x authentication fails.
CSCue91808
All TC
endpoints
6.0.x
6.1.x
6.2.0
Presentations made from TC based Cisco
TelePresence codecs may not visible by remote
participants due to the presentation channel spiking
outside of QoS boundaries in a cyclic manner.
CSCug09690
Touch pairing
6.0.x
6.1.x
6.2.0
Reverse DNS lookup for SSH may take a very long
time to succeed with a bad DNS configuration,
which may cause a time out the SSH pairing
between touch and endpoint. Solution is to increase
time out and remove reverse DNS lookup when
doing SSH.
CSCug48377
TC endpoints
with Dual
Monitor
configuration
6.1.0
6.2.0
When setting a monitor to:
* PresentationOnly in all monitorroles
* Second in DualPresentationOnly
the background/wallpaper needs to be displayed.