System information

Open and resolved caveats in TC6
59
Open caveats in TC6.2.1
For open caveats regarding other endpoints/vendors, see the interoperability section.
Reference ID
Endpoint /
Device
Versions
affected
Fix
Target
Summary
CSCuh04746
TC endpoints
using remote
control
6.1.x
6.2.x
6.3.0
Self-view has to be manually moved to the selected
monitor specified by xconfiguration Video
SelfviewDefault OnMonitorRole.
CSCui06221
Touch 8
6.2.0
6.3.0
The Touch 8 controller on endpoints running TC6.2
displays a button to change the layout of remote
participants in ad hoc, Multiway, and rendezvous
conferences. This button has no effect and is only
relevant in multisite conferences.
CSCui06180
Touch 8
6.2.0
6.3.0
When having one H323 call on hold and one active
H323 call there is no button appearing on the touch
panel to merge the call.
CSCue50474
EX60
6.0.x
6.1.x
6.2.0
6.3.0
EX60 camera image is black upon return from
standby. Toggling camera brightness from auto to
manual fixe resolves issue. Fixed in TC5.1.8.
CSCuh65923
Profile 52 (C60)
6.1.x
6.2.x
6.3.0
Monitor Roles set to wrong default values after
factory reset on C60 Profile 52 (standard C60 is not
affected).
CSCuh75104
TC software
used with ISDN
link
6.2.0
6.3.x
Placing or receiving calls via ISDN Link from a
TC6.2 system registered to VCS with ICE enabled
results in no media at the far end ISDN system.
CSCtq44757
All TC
endpoints
5.x
6.x
7.0.x
The TC software is configured with the default
SNMP community strings. This is needed for “plug
and play” functionality, but SNMP community
strings should be treated as “credentials” and
therefore this must be changed after initial
configuration.
CSCub01177
VCS registered
TC endpoints
5.x
6.x
7.0.x
We should send the RPID header when registered
to a VCS. Currently this is only done when SIP is
set to CISCO (CUCM) mode.
CSCuc64777
All TC
endpoints
5.1.x
6.x
6.3.0
Confusing call setup for p2p OBTP meetings. For
the second participant joining, the answer button will
change from Join Meeting to Incoming Call. When
button is clicked a new message appear with two
options; “join meeting and end current” or dismiss.
CSCug89221
Touch 8
6.x
7.x
Touch panel running release TT6.1.1 keeps on
sending DHCPREQUESTS every 10 seconds.
CSCug58614
Touch 8
5.x
6.x
6.3.x
Network paired endeavour loses pairing from time to
time and does not automatically reconnect
CSCuh37718
TC endpoints
using remote
control
5.x
6.x
6.3.0
Enabling Do Not Disturb is implemented in different
ways on OSD and Touch. On Touch it will
automatically be turned off after x minutes defined