System information

Open and resolved caveats in TC6
56
System
Reference ID Summary
CSCuc60271
Enable cryptography (except media encryption) in no-crypto software. This allows
usage of Touch panel on Non Crypto systems (TCNC)
CSCue10525
Timestamps in logs does not have same time zone. Logs from arms (expect osd)
seem to be logged with UTC, while ppc log entries are formatted according to local
time zone.
CSCuc64359
When a corrupt config.db is loaded onto a TC5 or TC6 system, the codec will not fully
boot and system will not load to a fully operational state.
CSCub82639
SX20 fan occasionally makes a loud noise.
CSCuc41943
Enhancement: Add MTR package to TC software.
CSCub85502
SX20 unexpectedly reboots due to abort in ConferenceControl.
CSCub67683
A stack based buffer overflow vulnerability is present in the facilities handling package
extraction. Successful exploitation of this vulnerability can allow an attacker to execute
arbitrary code with elevated privileges, and can be leveraged to forge software
packages.
CSCub67672
It may be possible for an attacker to overwrite arbitrary files on the system, by getting
an authenticated administrator to extract a specially crafted package file.
CSCub67663
A locally authenticated administrator may execute arbitrary commands via the
pkgextract utility using specially crafted package files.
CSCuc09826
The maintenance shell does not always kick in when the unit gets into a cyclic reboot.
If system crashed less than 4 minutes ago it will enter maintenance mode rather than
going into a reboot.
CSCua98636
Time on OSD and Touch 8” panel are different on SX20.
CSCuc09419
Codec at TC5.1 cannot be downgraded directly to TC3.1.x
CSCtt44610
TC software executables are not compiled as position-independent executables,
providing limited address space layout randomization support.
CSCtx09955
Logs fill up with IPV6 DHCPClient error message.
CSCtx84402
Endpoint should start DHCP discovery and negotiate new address, not re-use
address from VLAN less environment.
CSCtz78119
When log ctx RTPStatistics debug x is turned on, RTP statistics should appear in the
application.log
CSCua00135
Factory reset from codec CLI or web does not reset the layouts to factory settings.
CSCtz99399
TC console does not work with TC Non-Cryptographic software.
CSCty53353
Ringing did not stop after call is connected and even after call is disconnected.
CSCub84833
Tshell crashes when executing xFeedback register * and then clicking layout button
on the remote control.
CSCub54863
SX20 reboots when making or receiving a SIP call when system clock set to 1936.
CSCua02850
SX20 date set to 2038 causes restart when placing a call.
CSCub03016
The output of the xStatus Ethernet duplex setting on an EX90 when running TC5.x as
well as latest TE6 alpha release is incorrect. When it is configured for half it still
shows full.