System information

Open and resolved caveats in TC6
54
Resolved caveats in TC6.0.0
Audio
Reference ID Summary
CSCue08042
TC codec - Outgoing audio clips/saturated when receiving G.711 from 3
rd
party
device.
CSCtz62973
Noise is amplified to an unacceptable level when a presentation source is connected
to the SX20 via the supplied DVI-VGA/audio cable.
New cable available CPN: 74-10160-02
Camera
Reference ID Summary
CSCud95689
Cisco TelePresence PrecisionHD 1080p4x S2 camera may fail after upgrade.
The power LED is up but no remote control and no video is coming from the camera.
CSCuc21521
Script to upload PrecisionHD 1080p4x firmware image to camera to recover from
CSCua44699 - Camera fails to boot due to checksum validation failure.
CSCty38897
Camera image intermittently disappears because initialization fails after reboot on
EX90 and EX60.
OSD
Reference ID Summary
CSCty36557
Russian time zone displayed incorrectly as GMT+3 instead of GMT+4. The time itself
is correct.
CSCtz08306
If non-standard rate is set for default call rate, different rate is used instead of that set
for when dialling via web or remote
CSCty30567
Once a C series codec that is connected to a Cisco LCD 110L PRO 47 goes into
standby and the monitor itself goes to standby it is unable to receive a call (without
auto answer).
CSCtt13560
Not possible to store a contact for direct IPv6 dialling.
CSCua85783
When receiving presentation from MXP, no layouts are available in OSD UI.