System information

Open and resolved caveats in TC6
52
Touch 8
Reference ID
Summary
CSCue59134
From TC6.1.0 it is no longer possible to transfer, hold or resume one of the
participants in a multisite call. These functions are only available for a participant in a
peer-to-peer call. This is to get a more unified experience across all conferencing
methods.
CSCue60191
The Touch 8” fails to encrypt its read-write file systems allowing sensitive information
to be recovered after a factory reset has been performed. For example, a touch panel
paired with an endpoint over the network will store administrative credentials and an
SSH key providing access to the paired endpoint. Recovered credentials could be
used to obtain administrative access to previously paired endpoints.
CSCtu29812
From TC6.1.0 it is possible to enter a release key directly on the Touch panel.
CSCug24292
Touch panel behaviour change. “Merge” button is not displayed when the user clicks
on “Accept & Hold current” option. To merge the calls, select the active call, push
“Add” and select the call on hold. The merge button is removed from the inactive call.
This is to align with Cisco IP phones.
CSCug24043
A Cisco TelePresence Touch 8” looses connection and does not retry when network
is restored after repowering when using static IP. Bug has only been partly fixed in
CSCuc68224.
CSCue25312
A Cisco TelePresence Touch 8” panel does not populate the field “DNS Domain
Name” when checking the Administrator -> Network Settings -> IP & VLAN menu
CSCud33338
Touch panel (Endeavour) frozen when changing IP address from DHCP to static IP
Video
Reference ID Summary
CSCug70665
SX20 crashes with the following signature: VCODEC: H.264 Enc timeout on icont(s).
CSCuf17354
Similar to ghosting issue in CSCuc40011. Ghosting is experienced on a SX20 running
TC5.1.5. It generally happens 45 minutes into point-to-point calls.
CSCtz59250
TX9000 may show zebra stripes in call with C series endpoints after approximately 10
minutes
Web
Reference ID Summary
CSCue52815
Web server does not start up and hence does not allow any HTTP or HTTPS
connections if the endpoint is configured to verify the CA without any CA list uploaded.
CSCue65698
Loading a previously backed up configuration from web browser shows error.
“xConfiguration Video AllowWebSnapshots: On” is not restorable.