System information

Open and resolved caveats in TC6
50
Application
Reference ID Summary
CSCue42649
Self-view will not go back to fullscreen mode once presentation has executed. To
bring the SelfView back to FullScreen, you need to disable "SelfviewDefault" ->
"FullscreenMode" and enable.
CSCue04708
Every time the EX90 is power cycled, the sound output defaults to the ‘headset’, as
opposed to ‘speaker’.
CSCue04601
Wrong handling of the RTCP reception report may in some cases result in reported
packet loss more than 100%.
CSCua73240
When closing the privacy cover on EX60 and EX90, the unit does not stop sending
video.
CSCud79324
TC5x: In a point-to-point call, the remote video is shown in the first output display
(composite output). When presentation is started, the remote video is being replaced
at first output display (composite output) with the presentation content; the second
monitor (DVI output) also shows the presentation content.
Audio
Reference ID Summary
CSCue89381
C40 with release TC5.1.6: when upgrading to release TC6.0.0 audio over HDMI is lost
because of EDID CRC calculation error. The same monitor worked fine in previous
release.
CSCue08042
G.711 Audio received from 3
rd
party device clips/saturated when audio goes out from
TC codec.
Camera
Reference ID
Summary
CSCue78324
The image output of the PrecisionHD 1080p4x S2 camera is hazy/foggy.
Protocol
Reference ID Summary
CSCue00022
TC software not able to send Media toward OCS due to problem with xConfiguration
Video Layout RemoteLayoutFamily: PresentationSmallSpeaker
CSCuc89556
Cisco TC (C, EX, SX20, MX) based TelePresence codec may take longer than