System information

Open and resolved caveats in TC6

Reference ID Summary

CSCug56211

Touch panel loses pairing when “Connect to other codec” is pushed. This may happen

if the codec is not powered on or haven´t fully booted yet. When pairing is lost,

credentials are required to pair again.

CSCub67676

Endeavour fails to authenticate endpoints, which may allow an attacker to

impersonate the endpoint, and cause Endeavour to install any TT software package.

CSCtx02583

The call/add button on the Cisco Touch sometimes has the wrong label for systems

without MultiSite. In certain circumstances, it will be labelled as “Add” when it should

be “Add (Audio)” or labelled as “Add (Audio)” when it should be “Call”. This only

affects the label of the button, and doesn’t change the functionality. So while it may be

labelled as “Add”, it will connect as audio only. And while it may be labelled as “Add

(Audio)”, it still connects with video.

CSCug64208

A touch panel running TT6.1.0 release (TC6.1.0 on paired codec) shows 2 screens

superimposed on each other. One is the “Default Backgrounds” screen. The other is a

prompt to “Enter Menu Password”.

CSCug09690

Reverse DNS lookup for SSH may take a very long time to succeed with a bad DNS

configuration, which may cause a time out the SSH pairing between touch and

endpoint. Solution is to increase time out and remove reverse DNS lookup when

doing SSH.

Video

Reference ID Summary

CSCuh85487

C90/C60 HDMI input 3 source is not detected when DVI-3 input is connected at the

same time (TC6.x).

CSCue91808

Presentations made from TC based Cisco TelePresence codecs may not be visible by

remote participants due to the presentation channel spiking outside of QoS

boundaries in a cyclic manner.

Web

Reference ID Summary

CSCuh77884

Restoring a configuration from the web interface requiring a restart of lighthttpd will

abort the rest of the restore process. This is only a problem if any of the affected

configurations (4) differs from the default configuration.

CSCuh63012

Factory reset from web interface does not work in maintenance mode.

CSCuh41626

Attempting to change a users password through the web interface on a codec

configured in Strong Security Mode to a value that does not meet the password