System information

New feature descriptions TC6.0.0
38
New web path for capturing User Interface screenshots from Touch 8
With TC6, it is possible to capture screenshots from the Touch interface by entering the following URL:
http://<codec IP address>/web/translation.
Capturing screen shots from the Touch 8 is only supported on systems with a directly connected
Touch panel: MX-series and EX-series endpoints or C40, C60 and C90 when using Ethernet Port 2.
New Endpoint upgrade API for TC6 and Cisco TMS 14.1 and later
Cisco endpoints running software version TC 6.0 have a new API for use in software upgrades.
Endpoints with earlier TC software use the previous upgrade API.
It is now the endpoint that retrieves the software package from Cisco TMS. The upgrade will start
when the endpoint initiates it. The user will be prompted to upgrade or postpone when an upgrade
is ready. After completion the endpoint sends a success message to TMS and the upgrade will appear
finalized in TMS. The previous API had some flaws where TMS could detect an upgrade as failed
although it was successful. The new upgrade method is faster than the previous method.TMS
versions prior to 12.5 are now no longer supported. Cisco recommends TMS 14.1 or later for use with
TC6.1.