System information

New feature descriptions TC6.0.0
36
Certificate handling
The Security (Configuration – Security) gives the possibility to upload Certificate Authorities (CA) in
the PEM format (.pem) with one or more certificates in one file. It is possible to turn on and off the
certificate for HTTPS, SIP and 802.1x.
The locations of these files on the codec are:
/config/certs/apps/8021x.pem
/config/certs/ca/default.pem
There is no key-file as the certificates are stored decrypted.
Down speeding in multisite
You can now choose the total bandwidth. You set the total bandwidth to 4 mbit. First call will connect
at 2 mbit/s, next call will also connect at 2mbit. When calling the third participant, all calls will be down
speeded to accommodate all three calls within 4 Mbit.
The API commands to set this are:
► xConfiguration Conference 1 MaxTransmitCallRate: 2000
► xConfiguration Conference 1 MaxReceiveCallRate: 2000
► xConfiguration Conference 1 MaxTotalTransmitCallRate: 4000
► xConfiguration Conference 1 MaxTotalReceiveCallRate: 4000
MaxTransmitCallRate (and receive) is per call bandwidth usage.
MaxTotalTransmitCallRate (and receive) is total bandwidth usage.
1080p60 support for SX20, newer C60´s and C90´s
► TC6 supports 1080p60 for C90, and some C60´s in addition to SX20.
► All C60´s and C90´s currently in sale support 1080p60
► C90 and C60 Codecs that support 1080p60 will show this on the System Information web page. If
codec does not support 1080p60 there will be no line mentioning 1080p60.
► In TC6, 1080p60 is enabled by all C60 and C90 codecs that support it in hardware; no
configuration needs to be changed.
► C60: With the newer mainboard revision G and later C60 will be able to encode/decode 1080p60.
► C90: All C90´s with Cisco branding do support 1080p60.