System information

New feature descriptions TC6.2.0

Changed BFCP port range

Due to the support for ICE and TURN in TC6.2, the BFCP port is now incrementing from UDP/TCP

5070 to 5077. If a firewall is blocking ports in this range, the presentation channel will not be

established and the presentation will be sent in the main video channel. Please note that BFCP will

only be sent over TCP as a fallback for interworking scenarios.

Video mute icon on EX series

An icon will be displayed on the OSD to indicate that the privacy shutter is closed.

Camera tamper detection on PrecisionHD 1080p 12x

The following configuration will detect if camera is panned or tilted manually and will reset the camera

position to the last known position. The default setting is off.

xConfiguration Cameras Camera 1 MotorMoveDetection: On

Additional dialog added in “connect to other codec” message when

Touch 8 is disconnected from codec

The touch panel is now less prone to accidentally getting un-paired by a user when a paired codec is

shut down or rebooting. When the touch panel is trying to pair, an indicator is shown and by tapping

the toolbox icon a warning shows up, explaining that un-pairing will break the connection to the

currently paired video system.