User guide

Chapter 2
Product Overview
4
Powerline Network Adapter
Ports Panel of the Powerline 4-Port
Network Adapter (model number:
PLTS200)
Ethernet 1-4 These Ethernet ports (1, 2, 3,
4) connect to computers or other network
devices.
Power The Power port connects to the
powerline end of the power cord.
Placement Options
There are three ways to place the Powerline Adapter. The
first way is horizontal placement on a surface. The second
way is vertical placement on a stand. The third way is wall-
mounting.
Horizontal Placement
Place the Powerline Adapter on a level surface near an
electrical outlet.
Vertical Placement
The stand fits only on the side panel adjacent to the Power
port. Insert the stand into the side panel, and then place
the Powerline Adapter on a level surface near an electrical
outlet.
NOTE: When the Powerline Adapter is on the
stand, the Power port is closest to the stand.
Wall-Mounting Placement
The Powerline Adapter has four wall-mount slots on its back
panel. The distance between two adjacent slots is 60 mm
(2.36 inches).
Two screws are needed to mount the Powerline Adapter.
Suggested Mounting Hardware
2-2.5 mm
4 mm 1-1.5 mm
Note: Mounting hardware illustrations are not †
true to scale.
NOTE: Linksys is not responsible for damages
incurred by insecure wall-mounting hardware.
Follow these instructions:
Determine where you want to mount the Powerline 1.
Adapter. Make sure that the wall you use is smooth,
flat, dry, and sturdy. Also make sure the location is
within reach of an electrical outlet.
Drill two holes into the wall. Make sure the holes are 2.
60 mm (2.36 inches) apart.