User guide

•
Computer physically connected to the access point via Ethernet can
Computer
physically
connected
to
the
access
point
via
Ethernet
can
easily communicate with the device and carry out the setup process
even before the access point is connected to the primary DHCP server
of the home network.
• Enabled when the access point has detected that there is no other
DHCP server on the network. Otherwise, the built-in DHCP server is
disabled and the device behaves as a DHCP client.
• When the built-in DHCP server is enabled
- IP address of WAP300N is 10.100.1.1
- WAP300N gives out short IP address lease (15 seconds) to wired/wireless
client devices connected to the access point.