User guide

• The SimpleTap feature acts as a backdoor to connect to the 2.4Ghz
band
Reduce consumer pain of recalling or interacting with passwords, PINs..etc
SimpleTap connects a mobile device to the 2.4 GHz radio only
Default security is
WPA2
/AES
Default
security
is
WPA2
/AES
• Initial setup uses the SimpleTap steps
Once a mobile device is connected, the mobile device will connect to the
2.4Ghz band.
• SimpleTap virtual access point (VAP) is a hidden SSID that can be
disabled or enabled in the UI of router - “SimpleTap” tab.
• For every router before shipping a random SSID and passphrase will be
generated and burned into the firmware at manufacturing.
© 2011 Cisco and/or its affiliates. All rights reserved.
Cisco Confidential
203