Datasheet

6-20
Cisco PIX Firewall Hardware Installation Guide
78-13880-01
Chapter 6 PIX 525
Installing a DC Power Supply
Figure 6-20 Reconnecting the Fan Cables
Step 8 Reinstall the remaining fan. Make sure you orient the fan so that the cables feed to the right (toward
the second fan). Route the cable over the fan before you reconnect it. When correctly assembled, the
cables appear as shown in Figure 6-21.
Step 9 Starting with the fan farthest away from the power supply, bend the cable clamps over wires and into
the gap between chassis and fan housing.
31910
Fan
Fan connector
Front panel