Specifications

4-13

PIX 515E Security Appliance Getting Started Guide

78-17645-01

Chapter 4 Scenario: Site-to-Site VPN Configuration

Configuring the Other Side of the VPN Connection

You have just configured the local security appliance. Now you need to configure

the security appliance at the remote site.

At the remote site, configure the second security appliance to serve as a VPN peer.

Use the procedure you used to configure the local security appliance, starting with

the “Configuring the Security Appliance at the Local Site” section on page 4-4

and finishing with the “Viewing VPN Attributes and Completing the Wizard”

section on page 4-11.

Note When configuring Security Appliance 2, enter the exact same values for each of

the options that you selected for Security Appliance 1. Mismatches are a common

cause of VPN configuration failures.

What to Do Next

If you are deploying the security appliance solely in a site-to-site VPN

environment, you have completed the initial configuration. In addition, you may

want to consider performing some of the following steps:

To Do This ... See ...

Refine configuration and configure

optional and advanced features

Cisco Security Appliance Command

Line Configuration Guide

Learn about daily operations Cisco Security Appliance Command

Reference

Cisco Security Appliance Logging

Configuration and System Log

Messages