Specifications

Chapter 2 Scenario: DMZ Configuration
Configuring the Security Appliance for a DMZ Deployment
2-20
PIX 515E Security Appliance Getting Started Guide
78-17645-01
Step 2 In the Interface and Action area:
a. From the Interface drop-down list, choose Outside.
b. From the Direction drop-down list, choose Incoming.
c. From the Action drop-down list, choose Permit.
Step 3 In the Source area:
a. From the Type drop-down list, choose IP Address.
b. Enter the IP address of the source host or source network. Use 0.0.0.0 to allow
traffic originating from any host or network.