Specifications

Chapter 1 Installing and Setting Up the PIX 515E Security Appliance
Front and Back Panel Components
1-4
PIX 515E Security Appliance Getting Started Guide
78-17645-01
Step 5 Power up the PIX 515E security appliance. The power switch is located at the rear
of the chassis.
Front and Back Panel Components
Figure 1-3 illustrates the LEDs on the front panel of the PIX515E Security
Appliance.
Figure 1-3 PIX515E Security Appliance Front Panel LEDs
Figure 1-4 illustrates the back panel components.
LED Color State Description
POWER Green On On when the unit has power.
ACT Green On If part of a failover pair, the light is on when the unit is the active
unit.
Off If part of a failover pair, the light is off when the unit is in standby
mode.
NETWORK Green Flashing Flashing when at least one network interface is passing traffic.
POWER ACT NETWORK
97779