Installation guide

4-17
Cisco PIX Firewall Hardware Installation Guide
78-13880-01
Chapter 4 PIX 515/515E
Installing a Circuit Board in a PIX 515/515E
Step 3 Insert a circuit board through the cage opening and into the slot as shown in Figure 4-20.
Figure 4-20 Inserting a Circuit Board into a PIX 515/515E
Note When you insert a four-port Ethernet circuit board in the slot, the end of the circuit
board’s connector extends past the end of the slot. This does not affect the use or
operation of the circuit board.
Step 4 Attach the back cover plate making sure that the connecting flange on the circuit board goes through
the slot on the back cover plate as shown in Figure 4-21.
61904