Specifications

Single Package Air Conditioners Installation Instructions

Cooling

1. Be sure that electric power is OFF

2. Set thermostat Heat--Cool select to COOL.

3. Adjust thermostat setting to below room tempera-

ture.

4. Turn electric power ON for approximately one min-

ute, then OFF. During power application check the

following:

a. Contactor -- Contacts closing

b. Compressor -- ON

c. Condenser fan motor -- ON

d. Circulating air blower -- ON

5. Turn electric power OFF, check the following:

a. Contactor contacts opening.

b. Compressor -- OFF

c. Condenser fan motor -- OFF

d. Circulating blower -- OFF

Heating

If an Electric Heat Accessory is used, see its Installation

Manual for proper heater operation.

MOTOR

4-SPEED MOTOR

RED

BLACK

YELLOW

COM

MEDHI

MEDLO

MOTOR

RED

BLACK

YELLOW

3-SPEED MOTOR

COM

MED

FIGURE 7

Blower Motor Speed Taps (3--Speed and 4--Speed Motors)

BE SURE TO CHECK BLOWER MOTOR

SPEED DATA IN THE

TECHNICAL SUPPORT MANUAL.

513 01 1702 00