Specifications

Configuring the 12E/2FE Interfaces 6-21
Assigning a Color to a New Bridge Group
Figure 6-8 Verifying a New Bridge Group
Step 3
Repeat Step 1 and Step 2 for additional bridge groups.
Step 4 Save the change by selecting the Save Config option from the Bridge-Group pull-down
menu. (See Figure 6-6.)
This completes the procedure for creating a new bridge group using the 12E/2FE VLAN
Configuration WebTool.
Assigning a Color to a New Bridge Group
The WebTool allows you to assign a color to four of the router’s configured bridge groups and their
12E/2FE interfaces so that you can easily identify which 12E/2FE interfaces are assigned to a bridge
group.
Note While the WebTool’s configured Bridge-Groupslist box displays all bridge groups configured
on the router, you can only assign a color to four bridge groups at a time.
Complete the following steps to assign a color to a new bridge group:
Step 1 Select the new bridge group from the configured Bridge-Groups list box. The status line
of the WebTool prompts you to assign the bridge group to a color. (See Figure 6-9.)
Figure 6-9 Selecting the New Bridge Group
NM6405
New bridge groupNew bridge group status
NM6407
Colored buttons Selected bridge groupStatus line prompt