Specifications

Configuring Bridge Groups Using the 12E/2FE VLAN Configuration WebTool on the Cisco 7200 Series Routers
PA-12E/2FE Ethernet Switch 10BASE-T and 100BASE-TX Port Adapter Installation and Configuration
6-16
For complete descriptions of interface subcommands and the configuration options available for
Cisco 7200 series-related interfaces and functionality, and Cisco uBR7246 interfaces and
functionality, refer to the documentation resources listed in the “For More Information” section on
page v.
Configuring Bridge Groups Using the 12E/2FE VLAN Configuration
WebTool on the Cisco 7200 Series Routers
The 12E/2FE VLAN Configuration WebTool, shown in Figure 6-3, is a Web browser-based Java
applet that displays configured interfaces and bridge groups for 12E/2FE port adapters installed in
Cisco routers. The WebTool allows you to create and delete bridge groups (also referred to as
VLANs), add and remove 12E/2FE interfaces from bridge groups, assign colors to bridge groups and
12E/2FE interfaces, administratively shut down (disable) and bring up (enable) 12E/2FE interfaces,
and view the bridge-group status of each 12E/2FE interface.
Note The Cisco 7206 as a router shelf in a Cisco AS5800 Universal Access Server and the
Cisco uBR7246 do not support the 12E/2FE VLAN Configuration WebTool. If you are installing a
12E/2FE port adapter in a Cisco 7206 as a router shelf in an AS5800 or a Cisco uBR7246, skip this
section.
Figure 6-3 12E/2FE VLAN Configuration WebTool
You can access the 12E/2FE VLAN Configuration WebTool from your router’s home page. See the
“Accessing the 12E/2FE VLAN Configuration WebTool” section on page 6-16 for instructions.
Note You must use a Java-enabled Web browser to access the 12E/2FE VLAN Configuration
WebTool from your router’s home page.
NM5534
Bridge-Group
pull-down menu
Bridge groups list
box (all bridge groups
configured on the router)
12E/2FE port adapter
interfaces (0 through 13)
Selected bridge
groups
No bridge
group option
Status line Other bridge groups
(not selected)