Specifications

Cisco 7200 Series and the 12E/2FE Port Adapter 3-9

Installing a Port Adapter Slot Divider and a Single-Width Port Adapter

Following is the procedure for installing a port adapter slot divider in a Cisco 7200 series router:

Step 1 Position the slot divider so that the slot divider lever faces you and is at the bottom.

Step 2 Align the left and right edge of the slot divider between the guides in the port adapter slot.

(See Figure 3-9.)

Figure 3-9 Aligning the Slot Divider Between the Slot Guide (Cisco 7206 Shown)

Step 3

With the left and right edge of the slot divider aligned in the slot guides, slide the slot

divider all the way into the slot until you feel the slot divider lock into place (listen for a

click).

This completes the procedure for installing a port adapter slot divider in a Cisco 7200 series router.

Installing a Single-Width Port Adapter

Following is the procedure for installing a single-width port adapter in a Cisco 7200 series router:

Step 1 Attach an ESD preventive wrist strap between you and an unﬁnished chassis surface.

Step 2 Use both hands to grasp the port adapter by its metal carrier edges and position the port

adapter so that its components are downward. (See Figure 3-3.)

Step 3 Align the left and right edge of the port adapter metal carrier between the guides in the

port adapter slot. (See Figure 3-10.)

H6436

MII

RJ45

LINK

1O PWR

RJ-45

CPU RESET

FAST ETHERNET INPUT/OUTPUT CONTROLLER

ENABLED

PCMCIA

EJECT

SLOT 0

SLOT 1

FE MII