Specifications

Overview 1-7
IEEE 802.3 10BASE-T and IEEE 802.3u 100BASE-TX Specifications
Note Use Category 3 unshielded twisted-pair (UTP) crossover cables when connecting 10-Mbps
12E/2FE interfaces (port 2 through port 13) to a hub. Use Category 3 UTP straight-through cables
when connecting 10-Mbps 12E/2FE interfaces to an end station.
Use Category 5 UTP crossover cables when connecting 10/100-Mbps 12E/2FE interfaces (port 0
and port 1) to a hub. Use Category 5 UTP straight-through cables when connecting 10/100-Mbps
12E/2FE interfaces to an end station.
12E/2FE interfaces do not support VLAN trunking.