Specifications

CSU/DSU Service Module Examples

Configuring Serial Interfaces IC-123

CSU/DSU Service Module Examples

Two main categories of service module examples are provided:

• FT1/T1 Examples

• 2- and 4-wire, 56/64-kpbs Service Module Examples

FT1/T1 Examples

FT1/T1 examples are provided for these conﬁgurations:

• Specify a T1 Frame Type Example

• Specify the CSU Line Build Out Example

• Specify T1 Line-Code Type Example

• Enable Loopcodes Example

• Specify Timeslots Example

• Display a Performance Report Example

• Enable Loopback Line Examples

• Loopback DTE Example

• Setting the Clock Source Example

• TI CSU WIC Conﬁguration Example

Specify a T1 Frame Type Example

The following example enables super frame as the FT1/T1 frame type:

service-module t1 framing sf

Specify the CSU Line Build Out Example

The following example shows a line build out setting of –7.5 dB:

service-module t1 lbo -7.5db

Specify T1 Line-Code Type Example

The following example speciﬁes AMI as the line-code type:

service-module t1 linecode ami