Datasheet

16 Release 11.1 CA
Command Reference
show diag
To display hardware information for an interface, use the show diag privileged EXEC command on
Cisco 7500 series routers.
show diag [slot]
Syntax Description
Command Mode
Privileged EXEC
Usage Guidelines
This command first appeared in Cisco IOS Release 11.1 CA.
Use this command to determine the type of port adapter installed on a VIP2 in your router.
Sample Display
The following is sample output from the show diag command for a PA-E3 serial port adapter in
chassis slot 2:
byron# show diag 2
Slot 2:
E3 PA port adapter, 1 port
Port adapter is analyzed
Port adapter insertion time 1w0d ago
Hardware revision 0.1 Board revision A0
Serial number 4509983 Part number 73-2620-02
Test history 0x0 RMA number 00-00-00
EEPROM format version 0
EEPROM contents (hex):
0x20: 00 71 00 01 00 44 D1 1F 49 0A 3C 02 00 00 00 00
0x30: 01 00 00 00 97 06 12 00 FF FF FF FF FF FF FF FF
slot (Optional) Slot number of the interface.