Datasheet

Data Sheet
© 1992–2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 7 of 11
Regulatory Compliance
Other
AT&T Network Equipment Development Standards (NEDS) Generic Requirements, AT&T 802-900-260, Issue 3, December
1999
SBC TP76200MP, May 2002
Verizon SIT.NEBS.TE.NPI.2002.010, October 2002
MCI ESD
Product Specifications
Table 3 outlines the MRC-12 product specifications. Table 4 outlines the optical specifications for
the SFP modules.
Table 3. Product Specifications
Parameter Value
SFP capacity 12 modules
Supported payloads
SONET VT1.5, VT2, STS-1, -3c, -6c, -9c, -12c, -24c, and -48c
SDH VC-11, VC-12, VC-3, VC-4, VC-4-2c, VC-4-3c, VC-4-4c, VC-4-6c, VC-4-8c, VC-4-12c, and
VC-4-16c
Management
Card LEDs
Failure (FAIL) Red
Active/standby (ACT/STBY) Green/Amber
Signal fail (SF) Yellow
Port LEDs
Operational state (tri-color)
Operational, ready to carry traffic
Line condition present
Operations, standby (protect)
Green
Red
Amber
Card power draw, maximum
Without SFP optics 25W
Fully loaded with SFP optics 38W for 12-port and 30W for 4-port
Operating environment
Temperature
●
Standard (with CWDM and
DWDM SFPs)
–23 to 131°F (–5 to 55°C)
●
Extended –40 to 149°F (–40 to 65°C)
Humidity 5 to 95% noncondensing
Storage environment
Temperature –40 to 185°F (–40 to 85°C)
Humidity 5 to 95% noncondensing
Physical dimensions
Size 1 card slot
Weight, fully populated with 12
SFPs
2.68 lb. (1.22 kg)