Datasheet

Data Sheet
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 12 of 15
Optical Performance
Long Wavelength Performances C Band FEC Applications Noise-Limited
Input power range dBm –7 to –18 At BER PREFEC <10e-5 applicable at 10.7G, 11.1G only – 8.5dB OSNR (0.5nm
RBW)
Input power range dBm –7 to –18 At BER PREFEC <10e-5 (–400 to +1000 ps/nm) applicable at 10.7G, 11.1G only –
10dB OSNR (0.5nm RBW)
Long Wavelength Performances C Band E-FEC Applications Power-Limited
Input power range dBm –7 to –27 At BER PREFEC <7*10e-4 applicable at 10.7G, 11.1G only – 19dB OSNR
Input power range dBm –7 to –26 At BER PREFEC <7*10e-4 (–400 to +1300 ps/nm) applicable at 10.7G, 11.1G and
11.3G only – 19dB OSNR (0.5nm RBW)
Long Wavelength Performances C Band E-FEC Applications Noise-Limited
Input power range dBm –7 to –20 At BER PREFEC <7*10e-4 applicable at 10.7G, 11.1G only – 5dB OSNR (0.5nm
RBW)
Input power range dBm –7 to –20 At BER PREFEC <7*10e-4 (–400 ps/nm) applicable at 10.7G, 11.1G and 11.3G only –
7.5dB OSNR (0.5nm RBW)
Input power range dBm –7 to –20 At BER PREFEC <7*10e-4 +1300 ps/nm) applicable at 10.7G, 11.1G and 11.3G only –
7dB OSNR (0.5nm RBW)
CWDM XFP Modules
Cisco offers a full set of CWDM XFP modules for 10-Gbps applications. Table 14 lists optical parameters.
Table 17. CWDM XFP Modules: Optical Specifications
Product ID
Wavelength
Range Rx (nm)
Sensitivity
Rx (dBm)
Stability
Tx (nm)
Dispersion
Tolerance
(ps/nm)
Tx Power
Range
(dBm)
Supported Bit
Rate Target Distance
ONS-XC-10G-xxxx= 1450-1620 –14 +/– 6.5 0 to +800 +3 to +7 OC-192
STM-64
10GE
OTU2
OTU2e (up to
11.1Gbps)
10G FC
40km (OTU2 and 10GE)
10km (OC-192/STM-064)
Note: “xxxx” ranges from 1470 to 1610.
Electrical SFP Modules
Cisco offers multiple options for copper SFP modules. Table 18 lists the main characteristics.
Table 18. Electrical SFP Module Specifications
Product ID Bit Rate Connector Typical Distance
ONS-SE-ZE-EL= 10/100/1000 Mbps RJ-45 100m
SFP+ Modules
Cisco offers multiple options for SFP+ modules. Table 18 and Table 20 list the main characteristics.
Table 19. SFP+ modules
Product ID
Transmitter
Wavelength
Range (nm)
Transmit
Power Range
(dBm)
Receiver
Wavelength
Range (nm) Optical Reach
Receiver Power
Range (dBm)
ONS-SC+-10G-SR= 840-860 –7.3 to –1.3 840-860 26 m (FDDI-Grade / 62.5 micron)
33 m (OM1 /62.5 micron)
66 m (50.0 micron)
82 m (OM2 / 50.0 micron)
300 m (OM3 / 50.0 micron)
–11.1 (in OMA) to –1
ONS-SC+-10G-LR= 1260–1355 –8.2 to +0.5 1260–1355 10km –12.6 (in OMA) to 0.5