Specifications

1-19
Cisco ONS 15530 Planning Guide
OL-7708-01
Chapter 1 System Overview
System Components
Figure 1-8 shows the architecture of the 8-port multi-service muxponder.
Figure 1-8 8-Port Multi-Service Muxponder Architecture
The 8-port multi-service muxponder uses optical single-mode, optical multimode, and copper SFPs for
the client signals. There are no restrictions on populating the line card with SFPs. For example, you can
mix a single-mode SFP, a multimode SFP, and a copper SFP in the same muxponder. Table 1-7 lists
features for the SFPs supported by the 8-port multi-service muxponders.
Client
funcitonal
image
Client
functional
image
STS-48
framer
Client side Trunk side
2.5-Gbps ITU
trunk signal
T1/E1 ASIC
STS-48
STS-1
STS-48
113952
Table 1-7 8-port Multi-Service Muxponder SFP Features
Part Number Protocols Supported Fiber Type Wavelength
Connector
Type
15500-XVRA-10A2 Low band 8 Mbps to 200 Mbps MM 50/125 µm
MM 62.5/125 µm
1310 nm LC
15500-XVRA-10B2 Low band 8 Mbps to 200 Mbps SM 9/125 µm 1310 nm LC
15500-XVRA-11A2 Mid-band 200 Mbps to
622 Mbps
MM 62.5/125 µm 1310 nm LC
15500-XVRA-11B2 Mid-band 200 Mbps to
1.25 Gbps
SM 9/125 µm 1310 nm LC